Interior Trim
Flexible Mouldings
DuraFlex™ Casing:
Installation Information
Special Order Profiles
|
Stocked Mouldings
Custom Architectural Mouldings
|
W-366-W Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
0.625 |
Maximum Thickness (in.) |
0.625 |
Minimum Width (in.) |
3.25 |
Maximum Width (in.) |
3.25 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4, 6/0, 7/0, 8/0 |
|
HS-361 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
5/8 |
Maximum Width (in.) |
3 1/4 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4, 6/0, 7/0,
8/0 |
|
WM-376 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
5/8 |
Maximum Width (in.) |
2 1/4 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4,
6/0 |
|
HS-2 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
5/8 |
Maximum Width (in.) |
2 3/4 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4, 6/0, 7/0,
8/0 |
|
WM-444 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
11/16 |
Maximum Width (in.) |
3 1/2 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4,
6/0 |
|
WM-180 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
1 1/4 |
Maximum Width (in.) |
2 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4, 6/0 |
|
RB-3 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
1 |
Maximum Width (in.) |
3 1/2 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4, 6/0 |
|
EC-460 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
1 |
Maximum Width (in.) |
3 5/8 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4, 6/0 |
|
EC-470 Half Round Casing

|
Category |
Casing |
Minimum Thickness (in.) |
1 1/16 |
Maximum Width (in.) |
3 3/4 |
Door Sizes |
2/0, 2/4, 2/8, 3/0,
3/6, 4/0, 4/6, 5/0,
5/4, 6/0 |
|
Radius Calculator - refer to image right
This calculator is only to be used for Trus Joist® Microllam® 1.9E LVL
|
Technical Information:
Measuring & Ordering Flexible Mouldings

|
Top of Page |
Exterior Trim
Arkansas Pine
Sizes:
1 x 4
1 x 6
1 x 8
1 x 10
1 x 12
5/4 x 4,
5/4 x 6,
5/4 x 8,
5/4 x 10
Clear Cedar
Sizes:
1 x 4
1 x 6
1 x 8
1 x 10
Hardie Trim® Boards
Sizes:
5/4 x 4
5/4 x 6
5/4 x 8
5/4 x 12
Hardie Trim® Warranty
Installation Instructions
Hardie Trim® Website
HardieSoffit® Soffit
Size: 12" x 12' Primed -
Cement Smooth

Size: 12" x 12' Primed -
Smooth Vented

Size: 12" x 12' Primed -
Textured Vented

Hardie Trim® Website
MiraTec®
Sizes:
1 x 4 x 16
1 x 6 x 16
1 x 8 x 16
1 x 10 x 16
1 x 12 x 16
5/4 x 4 x 16
5/4 x 6 x 16
5/4 x 8 x 16
5/4 x 10 x 16
5/4 x 12 x 16
Product Styles

MiraTEC® Warranty
Application Instructions
MeraTEC® Trim Brochure
|
Paulowinia Cedar
Finger-Jointed Paulownia Cedar
Primed Trim
Sizes:
1 x 4
1 x 6
1 x 8
1 x 10
1 x 12
Product Info: About Paulownia General Characteristics Paulownia is a soft hardwood that is native to China and has been used for over one thousand years in the fine furniture and construction industries. The heartwood is light in color and the sapwood even lighter. The color difference between the two is not distinct. The wood is without odor or taste and when sanded has the feel of spun silk.
Paulownia is predominantly plantation grown and considered a "green" product given its ten to twelve year harvesting cycles.
The demarcation between heartwood and sapwood is not clear and the wood is straight grained and lustrous. Paulownia is comparatively soft and light in weight for a hardwood. Physical weight is slightly less than kiln dried western red cedar and two-thirds the weight of eastern white pine. It has a very high strength-to-weight ratio. The shrinkage coefficient is smaller than most commercially harvested coniferous and broad leaf woods. The wood dries rapidly and does not easily warp, cup, end check, splinter or split. Movement in service is rated as small.
Paulownia has one of the lowest thermal conductivity values of any wood; therefore the wood has very high insulation properties. Low thermal conductivity contributes to the low shrinkage in use. Compared to most woods, Paulownia has a high resistance to fire and flame and a higher ignition/flash point. Paulownia is naturally decay and insect resistant. It has no measurable pitch, resin or tannins so it is not subject to extractive bleeding. Paulownia is easy to work using hand or machine tools. It is easy to plane, sand, saw, rip, rout, and carve, and even during quick processing there is no danger of splitting or chipping. It easily absorbs glue, paint, and stains.
PVC Trim Board

Sizes:
3/4" x 5 1/2" x 18'
3/4" x 7 1/4" x 18'
3/4" x 9 1/4" x 18'
5/4" x 4" x 18'
Advantages of Using PVC Trim
Advantages of Using PVC Trim
- PVC trim resists all weathering.
- PVC trim resists mold and mildew growth.
- PVC won’t rot, check, splinter, or warp.
- There are no knots or sap pockets in PVC trim.
- PVC trim resists insects.
- PVC trim does not require painting but can be painted custom colors.
- PVC trim eliminates the need for flashing to protect trim pieces from moisture absorption.
- PVC trim allows for direct masonry and ground contact.
- PVC trim uses PVC urethane or other polymeric adhesive when joining.
Western Red Cedar
Sizes:
1 x 4
1 x 6
1 x 8
1 x 10
1 x 12 |