Have a Question?
or call: 704.847.8804
Open Monday - Friday
7:00 am - 4:00 pm
A tough, high-density hardboard with superior strength and resistance to impact and water absorption. It can be used as stage flooring, wet area wall linings, exterior doors, bench surfaces, boat building and signage.
Hoover Pyro-Guard Fire Treated Products
DryMax® High-Performance OSB sub-floor has exceptionally low thickness swell when exposed to moisture, helping to avoid costly and time-consuming joint sanding.
Plus it has a clear edge seal to help reduce edge swell. Designed for residential and light commercial applications, DryMax panels are rated for Exposure 1 bond durability in protected applications and limited exposure during normal construction delays. These panels have enhanced nail holding ability, stiffness and strength, plus there are no core voids, knots or splits. DryMax OSB panels are sanded on two sides for top and bottom surface smoothness and consistency, and are backed by a 300 day no-sand guarantee and a lifetime limited warranty (United States or Canada). That's peace of mind for both you and your customers.
iLevel® Edge Gold
DryGuard® enhanced OSB is a single-layer
Plus, it is free from core voids, knots and splits, and is backed by a 180-day no-sand guarantee and a lifetime limited warranty.
Sheet Sizes: 1/2", 3/4" x 49" x 97"
Woodstalk™ Fiberboard products utilize Dow BioProducts’ WOODSTALK Fiberboard MR, made from wheat straw, as core material. A substitute for MDF and particleboard core, WOODSTALK is manufactured with formaldehyde- free resin and annually renewable wheat straw fiber. Because WOODSTALK core will any formaldehyde through its manufacture, the product will contribute to low-emitting materials points through the LEED Green Building Rating System.
Miscellaneous Sheathing - Insulation Board
Tuff-R™and Super Tuff-R™
Versatile TUFF-R™ Insulation fits numerous residential insulation and sheathing requirements and can be applied to a variety of substrates. It features a high-performance polyisocyanurate foam core with radiant barrier-quality aluminum foil facers on both sides (one side reinforced).
Hoover Pyro-Guard FTR Plywood
Pyro-Guard is pressure-impregnated, interior fire-retardant treated lumber and plywood for enclosed structural applications.
Industrial Grade Particle Board
For exterior applications where appearance of only one sanded side is important; under-face of roof overhangs, fences, railcar and lorry linings, farm buildings, tanks, trays, commercial refrigerators, etc.
A Smooth, sanded, paintable surface. Up to 18 neatly made repairs permitted, all must be parallel to the grain. May be used for natural finish (clear sealer type) in less demanding applications. Synthetic repairs permitted.
C Tight knots to 1-1/2 in. Knotholes to 1 in. across grain and some to 1-1/2 in. Synthetic or wood repairs. Discoloration and sanding defects that do not impair strength permitted. Limited splits allowed, stitching permitted. C-grade veneer minimum permitted for Exterior panels.
ACX FIR Plywood - Sanded 1 Side
Marine Plywood Sanded Fir
Medium Density Overlay (MDO) is a plywood used in applications for signage (pre-primed and pre-finished available), marine, bus bench, outdoor seating (bleachers) and any other interior/exterior application where a smooth surface is required.
AraucoPly® Beaded Panels
AraucoPly® Beaded Panels are laid up on a composed core using exterior PF resin and 100% plantation grown Radiata pine for consistent quality and performance.
Available in Natural Bead (which is a clear face panel) and Star Bead, AraucoPly Beaded Panels are an excellent choice for interior and applications such as paneling and wainscot, and for exterior applications such as soffits and porch ceilings.
Dimensions: 48" x 96"
Standard Yellow Pine (SYP)Plywood
Floor underlayment, cabinets, paneling, furniture fixtures, and general plywood.
HardiePanel® Vertical Siding Smooth
HardiePanel® Vertical Siding Stucco